Noelastik mahkamlangan plastinka tebranish tenglamasining chegaraviy shartlrini aniqlash metodi.

Авторы

  • Zoyir Ravshanov Jizzakh State Pedagogic Instituti

Ключевые слова:

elastik bo'lmagan mahkamlanish, to'rtburchakli plastinkaning tebranishlari, xususiy chastotalar, teskari masala

Аннотация

Rectangular plate is widely used in various fields of technology [1-4]. If it is not possible to visually observe the state of fastening of a rectangular plate, the specific bending frequencies can be used to determine its position. The method of diagnosing the stiffness of circular and annular plates was performed in. In these works, the determination of the stiffness of circular and annular plates using the frequencies of bending vibrations is of one value. The question arises: if the two opposite sides of a rectangular plate rest freely, can the position of the other two opposite sides be determined by the specific frequencies of the bending oscillations? If the opposite sides of the plate are in an equally probable position, they will have frequencies such as a “free-state-solid-state” fastening state and a “solid-free-state” fastening state. It follows that the solution to the problem is twofold. This paper finds a method for determining the boundary conditions at the remaining opposite edges of a rectangular plate if the two opposite edges are hinged. Some examples are given and are theoretically based.

Библиографические ссылки

Abduxakimov, S., Mamatov, J., & Xolboyev, J. (2021). BAZI TASODIFIY MIQDORLARNING TAQSIMOT VA XARAKTERISTIK FUNKSIYALARI. Журнал математики и информатики, 1(3).

Abduxakimov, S., Mamatov, J., & Esirgapov, J. (2021). MARKOV ZANJIRILARI UCHUN ERGODIK TEOREMA. Журнал математики и информатики, 1(4).

Опубликован

2022-06-11

Выпуск

Раздел

Articles

Как цитировать

Noelastik mahkamlangan plastinka tebranish tenglamasining chegaraviy shartlrini aniqlash metodi. (2022). Журнал математики и информатики, 2(3). https://hp.jdpu.uz/index.php/matinfo/article/view/6039

Наиболее читаемые статьи этого автора (авторов)

1 2 > >>